EnGenius

|

ENGEWS660AP

EnGenius Neutron EWS660AP Dual-Band Wireless N900 Outdoor Managed Access Point

https://startechtel.odoo.com/web/image/product.template/38272/image_1920?unique=267946f

395.00 395.0 USD 395.00

395.00


  • Color: White
  • Condition: New
  • Warranty: 3 Month Warranty

This combination does not exist.

Key Features:

  • Mnfr. Part #: EWS660AP
  • Neutron Series Dual-Band Wireless N900 Managed Outdoor Access Point
  • Includes firmware that enables it to be immediately discovered, configured, monitored, and managed from a compatible Neutron Series PoE+ Controller/Switch (EWS5912FP, EWS7928FP or EWS7952FP).
  • Operating in both the 2.4 GHz and 5 GHz frequency spectrums and supporting 802.11a/b/g/n/ac standards the EWS660AP features wireless speeds up to on its 2.4 GHz band and up to 1300 Mbps on its 5 GHz band, a Gigabit port for connecting to 802.3at-capable PoE Switches. As the EWS660AP is designed to be mounted in high locations where power outlets may be scarce, it also supports PoE (Power-over-Ethernet) IEEE 802.3at for use with an 802.3at-capable PoE injector or 802.3at-capable PoE Switches, drawing up to 22 watts of power.
  • Up to 29 dBm transmit power
  • 6 internal 5dBi antennas (3 per band)
  • Band steering shifts dual band clients to 5GHz band for better throughput performance
  • Broadcast up to 8 SSIDs per frequency band
  • IP65-Rated Enclosure
  • Operation Modes: Access Point, Mesh AP
  • Frequency/Data Rate: 2.4GHz/Up to 450 Mbps, 5GHz/Up to 1300 Mbps
  • Protocols: 802.11a/b/g/n/ac, 802.1q (SSID to VLAN tagging), 802.1d (STP), 802.1x (Security)
  • Memory: 256 megabytes
  • Ports: 1 RJ45 Gigabit Ethernet, PoE 802.3at capable
  • Power Consumption: Up to 23W
  • Power Requirements: PoE 802.3at, Adapter 48VDC/0.8A
  • QoS: Wireless Multimedia (WMM)
  • Security: WPA/WPA2 Personal, WPA/WPA2 Enterprise, 802.1x RADIUS Authenticator, SSID broadcast enable/disable, MAC Address Filtering up to 50 fields, L2 Isolation (Access Point mode), Guest Network
  • SNMP v1/v2c/v3
  • Command Line Interface (CLI)

Recently Viewed

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.